The serrated anti-skid galvanized steel grating is a measure taken to better improve the anti-skid ability of the steel grating surface. The serrated anti-skid galvanized steel grating is welded from a flat steel with a serrated side. It has strong anti-skid ability and is especially suitable for wet and slippery places, oily working environments, stair treads, etc., and oil production platforms. It adopts hot-dip galvanizing surface treatment, has strong anti-rust ability, and is maintenance-free and replacement-free for 30 years.
The material of the toothed steel grating is generally stainless steel or Q235 carbon steel. The surface treatment is hot-dip galvanizing, cold-dip galvanizing, spray painting or stainless steel polishing, pickling. The price of the toothed steel grating is slightly higher than that of the flat steel grating. The prices of different specifications are different. The price of the toothed steel grating changes with the price of the toothed steel. The price is unstable, so please communicate with Shangqiao or call to inquire about the accurate price of the toothed steel grating.
Common specifications of toothed flat steel: 20*2 20*3 20*5, 25*5, 25*3, 32*5, 30*3, 40*5, 40*3, 50*5, 65*5, 75*6, 100*8, 100*10, etc. Common specifications of crossbars: 6*68*8 Toothed steel grating is used as a platform. The flat steel spacing is generally 30mm and 40mm, and the crossbar spacing is generally 50mm and 100mm.
In the prior art, the serrated anti-skid galvanized steel grating adopts toothed flat steel. One side of the toothed flat steel has uneven tooth marks. This structure can effectively improve the anti-skid performance. Toothed steel grating is also known as anti-skid steel grating. It has excellent anti-skid effect. The toothed steel grating welded by toothed flat steel and twisted square steel is both anti-skid and beautiful. The surface of the toothed steel grating is hot-dip galvanized, and the silver-white color enhances the modern temperament and can be used in a variety of places. The type of toothed flat steel is the same as that of general flat steel, except that there are uneven tooth marks on one side of the flat steel. The main function is to prevent slipping.
In order to make the steel grating plate have the function of preventing slipping, a tooth shape with certain requirements is made on one or both sides of the flat steel to prevent slipping during use. Anti-slip flat steel belongs to special-shaped sections, with periodic tooth shapes and symmetrical special-shaped sections. The cross-sectional shape of the steel has an economical cross-sectional shape while meeting the use strength. The cross-sectional shape of the ordinary anti-slip flat steel is used in ordinary use occasions, and the double-sided anti-slip flat steel is used in occasions where the front and back sides can be used interchangeably, such as the floor of the car spray paint room, which can increase the utilization rate. However, the production process of flat steel with this structure is more complicated.
