The size of the mesh determines the size of the stainless steel screen aperture, and the size of the mesh aperture determines the largest particles of the sieved powder. 10 mesh means that there are 10 holes per square inch, and 100 mesh means 100 holes. , the higher the mesh number, the more holes, and the higher the filtration accuracy.
In addition to indicating the holes of the screen, it is also used to indicate the particle size of the particles that can pass through the screen. The higher the mesh number, the smaller the particle size. The standard sieve needs to be matched with a standard vibrating sieve machine to accurately measure.
Screening particles is the size of the mesh that the particles can pass through the stainless steel screen. The mesh number of the stainless steel mesh is the number of mesh holes in the stainless steel mesh with a width of 1 inch (25.4mm). Therefore, high mesh numbers are used for fine particles. For large particle screening, choose a low mesh number. You can refer to the screen mesh number and particle size and its standard mesh number and particle size comparison table to choose how many mesh stainless steel screens you need.
Common acid and alkali stainless steel mesh is mainly used for screening and filtration under acid and alkali environmental conditions, gas, liquid filtration and other media separation. Stainless steel mesh generally uses stainless steel mesh, nickel wire, and copper wire as raw materials. Stainless steel has good resistance. Corrosion-resistant stainless steel wire mesh, high-temperature oxidation resistance, good low-temperature performance and excellent mechanical and energy production, so it is widely used in chemical industry, petroleum, power, nuclear engineering, aerospace, marine, medicine, light industry , textile and other departments.
During the forming, assembly, welding, weld inspection (such as flaw detection, pressure test) and construction marking of stainless steel equipment and components, surface oil, rust, non-metallic dirt, low melting point metal pollutants, paint, welding, etc. are brought to the surface. Its main purpose is to prevent corrosion and rust from slag and spatter.
The new product of stainless steel wire mesh for construction is woven from stainless steel rods and stainless steel wire ropes under the action of a pure machine controlled by a computer. It has a variety of patterns, beautiful and noble, and different patterns can have different application directions. , if the same application uses different patterns, different effects will be obtained. The woven metal mesh has a large width and length.
It can be applied to indoor and outdoor decorative curtain walls, walls, ceilings, railings, reception desks and partitions, floor decorations and whatever you personally imagine. It can even form a circle by itself and put a light bulb in it to become a lamp.
